Call us on
If you have any questions, please contact us
GO >>
Home > Exhibition > Content

4 Zone Wire Fire Alarm Control Panel with Sound Output Conventional Fire Alarm Control Panel Initiating Device Circuitshs-Ck1004

ANKA Sci-Tech Co.,Limited | Updated: Jun 15, 2016

Basic Info

Model NO.:AJ-S1004

Four Style B (Class B) Initiating Device Circuits (IDCs).
All zones accept two-wire smoke detectors and any normally-open contact devices.
One built-in, Style Y (Class B) Notification Appliance (Signal) Circuits (NACs).
Alarm, Trouble and Supervisory, Form-C relays standard.
24-volt operation.
Resettable four-wire smoke detector power @ 500 mA.
Non-resettable power @ 500 mA.
One-man walk-test programmable for silent or audible test.
Disable/Enable control per IDC.
Reverse polarity protection.

AC POWER: 220VAC, 50 Hz.
BATTERY: Sealed lead-acid batteries only. Maximum charging circuit: 
27.6VDC @ 0.8 amp for normal flat charge. Maximum battery charger 
capacity: 18AH battery.
NOTE: Two 10AH batteries can be housed in the cabinet. Larger batteries 
require a separate battery box.
Total DC24V system power: 3.0 amps.
Maximum current per NAC: 1.25 amps.
Maximum battery charging capability: 18 AH.
Resettable four-wire smoke detector power output.
Non-resettable power output.
Integral Form-A Alarm, Trouble and Supervisory relays, rated at: 2.0 amps @ 
30 VDC (resistive), 2.0 amps @ 30 VAC (resistive).

ANKA Sci-Tech Co.,Limited