Product Categories
Call us on
+86-755-89603006
If you have any questions, please contact us
GO >>

Hotel Fire Alarm Fire Detection And Alarm System

Hotel Fire Alarm Fire Detection And Alarm System

This is conventional type fire alarm control panel, it have 2 zone, each zone can connect 25pcs 2 wire devices, such as smoke detector, heat detector, pull station, etc. Suit for home, small factory, small hotel, etc. ANKA Sci-Tech Co.,Ltd is one of the leading China hotel fire alarm fire...

Features

This is conventional type fire alarm control panel, it have 2 zone, each zone can connect 25pcs 2 wire devices, such as smoke detector, heat detector, pull station, etc. Suit for home, small factory, small hotel, etc.


ANKA Sci-Tech Co.,Ltd is one of the leading China hotel fire alarm fire detection and alarm system manufacturers and suppliers, and also a professional company equipped with productive factory, we supply hotel fire alarm fire detection and alarm system with high quality and competitive price.

Product Description
Feature
An automatic fire alarm system – in general  is made up of smoke, heat & other detectors, manual call points, audible  warning devices, fire alarm control panels with remote notification capability,  which can supply early warning of a developing fire. Such a system, on the  other hand, is unable to assure protection against property damage or loss of  life resulting from a fire. The manufacturer recommends that smoke and/or heat  detectors must be positioned throughout a protected premise following the  recommendations of the current edition of the EN Standard, manufacturer’s  recommendations contained in the Guide for proper Use of System Smoke Detectors, which is made available at no charge to all installing dealers. A study  by the Federal Emergency Management Agency (an agency of the United Europe)  indicated that smoke detectors may not go off in as many as 35% of all fires. A  fire alarm system may not provide timely or sufficient notice, or might not  function, for a diversity of reasons: Smoke detectors may not sense fire where  smoke cannot reach the detectors such as in chimneys, in or behind walls, on  roofs, or on the other side of closed doors. Smoke detectors also may not sense  a fire on another level or floor of a building. A second-floor detector, for  example, may not sense a first-floor or basement fire.

Specifications

Item

Describe

Primary 

AC    120VAC 50/60 Hz Power supply rating

240VAC    50/60 Hz

Power    supply rating 

2 Amps @    24VDC

Maximum    Battery Charging Current 

0.98    Amps @ 26VDC

Initiating    Device Circuits 2 Zones 

Alarm    Zone 2

Normal    Initiating Operating Voltage 

23VDC,    Maximum 26VDC, regulated

Normal    Quiescent Current (normal status) 

<50mA

Alarm    Current (not include the others) 

<150    mA

Short    Circuit Initiating Current (per zone) 

35mA    Maximum

Maximum    Initiating Resistance (per zone) 

10 ohms

Initiating    End-of-Line Resistor 

4K7    ohms, 1/2W 5%

Standby    Detector Current (per zone) 

4mA    maximum

Maximum    Detector Count (per zone) 

30    detectors

Initiating    Cabling Type 

18AWG    Twisted Shielded pair (14 – 18 AWG)

Detector    Base Impedance 

430 ohms

Notification    Appliance Circuits 

1 NACs,    Special Application

Maximum    NAC Current Rating 

1 Amp    maximum per circuit

NAC    Operating Voltage 

26VDC    Nominal, 30VDC Maximum

NAC    End-of-line Resistor 

1N4007    Diode

FAULT    Relay rating 

2A &    30VAC, resistive

Alarm(    Auxiliary ) Relay rating 

2A &    30VAC, resistive

CP1002M    (Master alarm panel) 

With    power supply and digital display

CP1002S    (Slave alarm panel) 

With    power supply ,without digital display

CP1002W(Slave    alarm panel) 

With    power supply, without digital display

Clear Picture



why choose us?
- 2000 square meters factory, have capability to supply wide range of products
- Good  quality control ,with competitive prices.
- Prompt  delivery.
- Good  after-sales service.
- No  Minimum order quantity limited. OEM and ODM are also accepted.
- We  locate in Shenzhen of China, easy for export.

Our Services
1.We  guarantee that all our items are "as stated" in their descriptions.  We strive for 100% customer satisfaction on every sale we complete.
2.We are manufacture, there is no middle man, no high markup, so we can provide  quality items yet very competitive price.
3.If you have any questions please contact us first, most are responded within  12 business hours.

Payment

  1. LC

  2. T/T

  3. West Union

  4. Paypal

  5. Trade Assurance

Shipment
1. All  package can sent by FedEx/DHL/UPS/EMS, based on customer requires.
2. Freight  By Sea to Any nearest port of customer country.
3. Freight  by Air to airport of import country.

Company Information
 ANKA is a  high-tech enterprise specializing in the whole process of Research,  Development, Manufacture and Marketing security alarm products. With the  company policy of "Innovative technology, Makes safe life" and the  responsibility of "Progress for protecting people's safety".

FQA
1. Quality of our company.
We are the  manufacturer of alarm system for more than 10 years, we are full of experience  and technology.

2. Quality of our products.
Our  engineers who ever worked in a very famous company of alarm system, all the  products must be strictly inspected before selling.

3. Quality of our services.
All of our  products have a full two-year warranty and low repair rate.

4. Quality of your shipment.
We arrange the  shipment as soon as we get the payment, quickly and professionally.

5. Quality of our sales representatives.
Truly,  Warmly, Patiently, Professionally.

Recommendation

Conventional Fire Alarm Control Panel 

High Stability Tracking IP Addressable Fire Alarm Control Panel

LCD Dispaly PSTN + TCP/IP Home alarm panel system

Fire Alarm Conventional Photoelectric Smoke Alarm Detector

315/433MHz Wireless PIR Detector

Related Products
E-mail to us
Product Categories
To learn more, please click into each category ...
ANKA Sci-Tech Co.,Limited